A+ Server 1113S-WN10RT (Complete System Only)
A+ Products Systems 1U [ 1113S-WN10RT ]




Integrated Board
H11SSW-NT

Views: | Angled View | Top View |
| Front View | Rear View |


Key Features
• Virtualization
• Cloud Computing
• All Flash Storage

1. Single AMD EPYC™ 7000-Series Processor
2. Up to 2TB Registered ECC DDR4
  2666MHz SDRAM in 16 DIMMs
3. Expansion slots:
  2 PCI-E 3.0 x16 (FH/HL) slots,
  1 PCI-E 3.0 x16 (LP) slot
  M.2 Interface: PCI-E 3.0 x2
   (NVMe based)
  M.2 Form Factor: 2280, 22110
  M.2 Key: Onboard M-key
  Number of M.2: 2
2. Integrated IPMI 2.0 + KVM with
  dedicated LAN
  • Software Out of Band License key
   (SFT-OOB-LIC) included for OOB
   BIOS management
5. 2x 10GBase-T LAN ports
  via Broadcom BCM57416
6. 10 hot-swap 2.5" U.2 NVMe drive bays,
  optional 4 SATA3 drive support with
  additional cables
7. 750W Redundant Power Supplies
  Platinum Level (94%)
  (Full redundancy based on configuration
  and application load)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (with 1 CPU, minimum 8 DIMMs, 1 NVMe). Recommended configuration for best performance is at least 24 or 32 Cores per CPU.

Drivers & Utilities BIOS IPMI Tested Memory Tested M.2 List NVMe Options Manuals OS Certification Matrix Quick-References Guide Drive Options Network Card (AOC) Matrix


Product SKUs
AS -1113S-WN10RT
  • A+ Server 1113S-WN10RT
Motherboard
H11SSW-NT
Processor/Chipset
CPU
  • Single AMD EPYC™ 7000-series Processor
  • Socket SP3
Cores
  • Up to 32 Cores
Chipset
  • System on Chip (SoC)
System Memory
Memory Capacity
  • 16 DIMM slots
  • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • Broadcom BCM57416 Controller
VGA
  • ASPEED AST2500 BMC
Expansion Slots
PCI Express
  • 2 PCI-E 3.0 x16 (FH/HL) slots
  • 1 PCI-E 3.0 x16 (LP) slot
M.2
  • Interface: PCI-E 3.0 x2 (NVMe based)
  • Form Factor: 2280, 22110
  • Key: Onboard M-key
  • Number of M.2: 2
Input / Output
NVMe
  • Up to 10 U.2 NVMe support
SATA
  • Optional 4 SATA3 (6 Gbps) support via additional cables
LAN
  • 2x 10GbBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 7 USB 3.0 ports (4 rear + 2 front + 1 Type A)
VGA
  • 1 VGA port
Others
  • 1 COM port
  • 2 SATA DOM power connectors
  • TPM 1.2 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
Chassis
Form Factor
  • 1U
Model
  • CSE-116TS-R706WBP3
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 23.5" (597mm)
Weight
  • Net Weight: 20 lbs (9.1 kg)
  • Gross Weight: 33 lbs (15.0 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 10 hot-swap 2.5" U.2 NVMe drive bays
Backplane
Hybrid Backplane
  • Supports up to 10x 2.5" NVMe storage devices, 4 of them SAS3/SATA3 compatible
System Cooling
Fans
  • 6 heavy-duty PWM fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
AC/DC240V Input Redundant Power Supply
700W/750W Redundant Power Supplies with PMBus
Total Output Power
  • 700W/750W
Dimension
(W x H x L)
  • 54.5 x 40.25 x 320 mm
Input
  • 100 - 140Vac / 8 - 6A / 50-60Hz
  • 200 - 240Vac / 4.5 - 3.8A / 50-60Hz
  • 200 - 240Vdc / 4.5 - 3.8A (CCC Only)
+12V
  • Max: 58A / Min: 0.5A (100 - 140Vac)
  • Max: 62A / Min: 0.5A (200 - 240Vac)
  • Max: 62A / Min: 0.5A (200 - 240Vdc)
    (CB/CCC Only)
+5V sb
  • Max: 3A / Min: 0A
Output Type
  • Gold Finger Connector Mating with Molex 45984-4343
Certification Platinum Level Certified
Platinum Certified
[ Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 6-fan status tachometer monitoring
  • Up to six 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 6x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Parts List - (Items Included)
Part Number Qty Description
Motherboard MBD-H11SSW-NT 1 Super H11SSW-NT Motherboard
Chassis CSE-116TS-R706WBP3 1 1U Chassis
HD Backplane BPN-SAS3-116A-N10 1 10-port 1U SAS3 12Gbps Hybrid backplane, support up to 10x 2.5-inch NVMe storage devices, 4 of them are SAS3/SATA3 drives compatible.
Cable(s) CBL-PWEX-1072 2 PWEX,2X2M/P4.2 TO 2X2F/P4.2,BLK*1,YEL*1,28CM,16AWG
Cable(s) CBL-PWEX-1073 2 PWEX,2X2F/P4.2 TO 1X4M/P5.08,BLK*2,YEL*1,RED*1,5CM,18AWG
Cable(s) CBL-SAST-0814 1 SLIMLINE SAS x8 (LA) to 2x Oculink x4,INT,13CM,34AWG
Cable(s) CBL-SAST-0815 1 SLIMLINE SAS x8 to 2x Oculink x4,INT, 22CM,34AWG
Cable(s) CBL-SAST-0816 1 SLIMLINE SAS x8 (LA) to 2x Oculink x4,INT, 28CM,34AWG
Cable(s) CBL-SAST-0817 1 SLIMLINE SAS x8 (LA) to 2x Oculink x4,INT, 36CM,34AWG
Riser Card RSC-R1UW-2E16 1 1U LHS WIO Riser card with two PCI-E x16 slots
Riser Card RSC-WR-6 1 1U RHS WIO Riser card with one PCI-E x16 slot,HF,RoHS
Heatsink / Retention SNK-P0062P 1 1U Passive CPU Heat Sink for AMD Socket SP3 Processors
Mounting Rail(s) MCP-290-00063-0N 1set Rail set, quick/quick, default for 1U 17.2"W for SC113/SC116,RoHS/REACH
Drive Tray(s) MCP-220-00127-0B-BULK 10 Black gen3 Hotswap 2.5 NVMe drive tray, Orange tab/Lock/Bulk
Fan(s) FAN-0101L4 2 40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808
Software SFT-OOB-LIC 1 OOB Management Package (per node license)

Optional Parts List
Part Number Qty Description
Storage Controller card & cable AOC-S3008L-L8e
& 1x CBL-SAST-0699
AOC-S3008L-L8i
& 1x CBL-SAST-0699
AOC-S3108L-H8iR
& 1x CBL-SAST-0699
-
 
-
 
-
 
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 122HDD, HBA
MINI SAS HD-4 SATA,12G,INT,75/75/90/90CM,75CM SB,28/30AWG
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E
MINI SAS HD-4 SATA,12G,INT,75/75/90/90CM,75CM SB,28/30AWG
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60
MINI SAS HD-4 SATA,12G,INT,75/75/90/90CM,75CM SB,28/30AWG
TPM AOM-TPM-9655V - Vertical TPM with Infineon 9655 TCG 1.2
AOM-TPM-9655V-S - Based on AOM-TPM-9655V with Server TXT package
AOM-TPM-9665V - AOM-TPM-9665V using SLB9665 Chipset supporing TPM2.0,RoHS/REACH
AOM-TPM-9665V-S - Vertical TPM TCG 2.0 Provisioned for a server,RoHS/REACH
Optional Kit for 4 SATA Drive Support CBL-SAST-0813 1 SLIMLINE SAS x8 (LA) to SATA x4,INT, 16/26CM,32AWG
MCP-220-00147-0B 4 Black gen-3 hot-swap 2.5" Tool-less HDD tray (clip design)
Global Services & Support OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
Hide Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.