A+ Server 2022TC-BTRF

  A+ Products  Systems   2U   [ 2022TC-BTRF ]

Supermicro AMD Solution Aplus Server 2U AS-2022TC-BIBQRF







Integrated Board
Supermicro AMD Solutions Aplus  motherboard Opteron4000 H8DCT-F
H8DCT-F


Key Features (per node)

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 4000 series

    processors (Socket C32)

    8/6/4-Core ready; HT3.0 Link support
2. Up to 192GB DDR3 1600MHz ECC

    Registered DIMM; 12x DIMM sockets
3. 1400W High-efficiency Redundant

    Power Supplies;

    Gold Certified
4. 1x Low-profile PCI-E 2.0 in x16 slot

    (For add-on card up to 5.9"in length)
5. 3x Hot-swappable SATA Hard Drive

    Bays
6. 1 dedicated LAN for system

    management (IPMI2.0)


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2022TC-BTRF
  • A+ Server 2022TC-BTRF (Black)
 
Motherboard
Super H8DCT-F
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket C32
  • Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5670 + SP5100 Chipset
Note: Supports 4000 series processors with Max ACP 75W (TDP 95W)
 
System Memory (per node)
Memory Capacity
  • 12 DIMM sockets
  • Support up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
  • Dual channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.35V or 1.5V
 
On-Board Devices (per node)
SATA
  • AMD SP5100 (RAID 0, 1)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port

    Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots (per node)
PCI-E
  • 1x PCI-E 2.0 x16
 
Input / Output (per node)
SATA
  • 3x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear, 1x header
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
 
System BIOS (per node)
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Twin2 Rackmount
Model
 
Dimensions (stand-alone chassis / package)
Height
  • 3.47" (88mm) / 11.22" (285mm)
Width
  • 17.25" (438mm) / 26.38" (670mm)
Depth
  • 28.5" (724mm) / 39.76" (1010mm)
Gross Weight
  • 85 lbs / 38.6 kg
Available Colors
  • Black
 
Front Panel
Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed /

     power failed LED
 
Drive Bays
HDD Bay
  • 3x 3.5" Hot-swappable SATA Hard Drive Bays (per node)
  • Enterprise SATA HDD only recommended
 
System Cooling
Fans
  • 4x PWM fans w/ Optimal Fan Speed Control
 
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified

  Gold Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DCT-F 4 Super H8DCT-F Motherboard
Chassis CSE-827H-R1400B 1 2U Chassis
Backplane BPN-827ADP-X8 4 BPN-SASADPûSAS827-X8DTT;cable req
Cable 1 CBL-0151L 4 CBL,FRONT CNTL,16 TO 16 PIN,RA,RND TUBE,30CM,28AWG
Cable 2 CBL-0320L 4 4 pin to two 4 pin FAN CABLE FOR 2U TWIN SERVER (15+18 CM) 24AWG
Cable 3 CBL-0323L 4 CBL,I2C,1X4F/P2.0 TO 1X4F/P2.0,23CM,26AWG,BRN/BLK/ORG/WHT
Cable 4 CBL-0317L 4 SATA,INT,ROUND,SET OF 3,ST-ST 17/20CM,ST-RA 20CM,26AWG
CD CDR-APLUS2 1 DRIVER CD FOR AMD SP5100 CHIPSET MB
Heatsink / Retention SNK-P0022+ 8 1U PASSIVE CPU HS FOR AMD CPU SOCKET F
Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.