SuperServer F628R3-RC0BPT+

  Products  Systems   FatTwin™   [ F628R3-RC0BPT+ ]









Integrated Board
Super X10DRFR-NT




Views: | Angled (node) | Top (node) |

| Angled Front (system) | Rear (system) |



Key Features

4 Hot-plug System Nodes in 4U

Each node supports:




1. Dual socket R3 (LGA 2011) supports

    Intel® Xeon® processor E5-2600

    v4/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB ECC 3DS LRDIMM , up to

    DDR4- 2400MHz ; 16x DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP)

    1 PCI-E 3.0 x8 (Micro Low Profile)

    See Cable Configuration Map
4. I/O ports: 2 10GBase-T ports, 1 video,

    2 USB 3.0 ports
5. Built-in Server management tool

    (IPMI 2.0, KVM/media over LAN) with

    dedicated LAN port
6. 8x 3.5" Hot-swap SAS/SATA via Broadcom

    3008 or 6x 3.5" Hot-swap SAS/SATA

    + 2x optional NVMe
7. 2x 80mm 11k RPM middle fans
8. 1280W Redundant Power Supplies

    Platinum Level (95%)




 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested M.2 List   NVMe Options   Manuals    OS Certification Matrix    Quick-References Guide  Drive Options   Network Card (AOC) Matrix


Product SKUs
SYS-F628R3-RC0BPT+
  • SuperServer F628R3-RC0BPT+ (Black)
 
Motherboard


Super X10DRFR-NT
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *

  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • SAS 3.0 (12Gbps) via Broadcom 3008
  • HBA/SW RAID 0, 1, 10 support
SATA
  • SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400
 
Input / Output (per node)
SAS
  • 8 SAS3 (12Gbps) ports
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports
VGA
  • 1 VGA port
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AS-R1K28BP
 
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
 
Expansion Slots (per node)
PCI-Express
 
Drive Bays (per node)
Hot-swap
  • (6+2) 3.5" Hot-swap SAS3 HDD trays
  • 8 SAS3 or 6x SAS3 + 2 NVMe (optional)

    Note: NVMe support requires 2 CPUs installed
 
Backplane
  • 1 SAS/SATA backplane
  • 1 SAS/SATA/NVMe hybrid (2 slots)
 
System Cooling (per node)
Fans
  • 2x 8cm 11k RPM middle fans
 
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+

  Platinum Certified

  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
See Parts List



Parts List - (Items Included)
 

Part Number

Qty

Description

Motherboard / Chassis MBD-X10DRFR-NT

CSE-F424AS-R1K28BP
4

1
Super X10DRFR-NT Motherboard

4U Chassis
Backplane BPN-ADP-F418LS 4 Power Distribution Board for X10DRFR,RoHS/REACH,PBF
Backplane BPN-SAS3-F424-A2N2 4 2x-port Fat Twin SAS3 12Gbps hybrid backplane, support up to 2x 3.5-inch SAS3/SATA3/NVMe storage devices
Backplane BPN-ADP-8S3008-1UF 4 BPN-ADP-8S3008-1UF
Backplane BPN-SAS3-F424-A6 4 6-port Fat Twin SAS3 12Gbps backplane, support up to 6x 3.5-inch SAS3/SATA3 HDD/SSD
Cable 1 CBL-OTHR-0022L 4 20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF
Cable 2 CBL-0486L 8 2x2 to 2x2 15cm power cable HF. 18AWG
Cable 3 CBL-PWCD-0900 4 PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17AWG
Cable 4 CBL-SAST-0691 4 MINI SAS HD RA- 2x MINI SAS HD,INT,15/59CM,28AWG
Cable 5 CBL-0480L 4 4 pins to 4 pins 40cm PDB to MB power cable HF. 18AWG
Cable 6 CBL-SAST-0550 4 MINI SAS HD,12G,INT,25CM,30AWG
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1763-QRG 1 Quick Reference Guide for F628R3-RC0B+/RC0BPT+
Heatsink / Retention SNK-P0048P 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Power Supply PWS-1K28P-SQ 4 1U 1280W, redundant single output power supply




Optional Parts List
  Part Number Qty Description
Software SFT-OOB-LIC 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)
Mounting Bracket MCP-120-42405-0N 1/node 2nd power adapter mounting bracket
Power adapter Board BPN-ADP-2UPWR-O-P 1/node Power adapter board
Drive Carrier MCP-220-93801-0B 2/node Drive carrier 3.5" to 2.5" with adapter tray
NVMe Cable CBL-SAST-0623 2/node 45cm NVMe cable
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.