 |
|
 |
| MBD-X11SSZ-F |
|
| |
|
|
| Form Factor |
|
| Dimensions |
-
9.6" x 9.6" (24.38cm x 24.38cm)
|
| |
|
|
| CPU |
-
Intel® 6th Generation Core™ i3 series
- Intel® 6th Generation Core™ i5 series
- Intel® 6th Generation Core™ i7 series
- Intel® 7th Generation Core™ i3 series
- Intel® 7th Generation Core™ i5 series
- Intel® 7th Generation Core™ i7 series
- Intel® Celeron®
- Intel® Pentium®
- Intel® Xeon® processor E3-1200 v5 series
- Intel® Xeon® Processor E3-1200 v6 series
- Socket H4 (LGA 1151) supported; CPU TDP support Up to 91W
|
| Note |
-
BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ Processors and Intel® Xeon® Processor E3-1200 v6 series
|
| |
|
| Memory Capacity |
-
Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
|
| Memory Type |
-
2400/2133/1866MHz ECC DDR4 SDRAM 72/64-bit, 288-pin (UDIMM) gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
-
Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
-
Intel® C236 controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
- Intel RSTe
|
| Network Controllers |
-
Single Intel® PHY I219LM LAN controller
Single Intel® Ethernet Controller I210-AT
|
| Audio |
|
| Graphics |
- Intel® HD Graphics, Aspeed AST2400 BMC
- 3 Independent Displays, VGA is from BMC
A CPU with processor graphics is required for Intel HD Graphics (DVI/DP). Example: E3-1275 v5
|
| |
|
| USB |
- 9 USB 2.0 ports (2 rear, 6 via header(s), 1 Type A)
- 4 USB 3.0 ports (2 rear, 2 via header(s))
|
| Video Output |
- 2 DP (DisplayPort) port(s), 1 DVI - I port(s), 1 VGA port(s)
|
| Serial Port / Header |
- 2 COM Ports (2 header(s))
|
| TPM |
|
|
|
|
|
| PCI-E |
-
1 PCI-E 3.0 x16 (in x16 slot)
- 2 PCI-E 3.0 x4 (in x8 slot)
-
|
| |
|
| BIOS Type |
|
| BIOS Features |
-
Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- Hardware BIOS Virus protection
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- AMT
- IPMI2.0
- KVM with dedicated LAN
- NMI
- SuperDoctor® 5
- vPro
- Watchdog
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- +1.8V, +12V, +3.3V, +5V, +5V standby, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
|
| FAN |
- 6x 4-pin fan headers (up to 6 fans)
- 6 fans with tachometer status monitoring
- Fan speed control
- Overheat LED indication
- Pulse Width Modulated (PWM) fan connectors
- PWM fan speed control
- System level control
- Thermal control tachometer fan connectors
|
| Temperature |
-
Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
-
CPU / System Overheat LED
- UID/Remote UID
|
| Other Features |
-
8-pin 12v DC power connector
- ACPI power management
- ATX Power connector
- Chassis intrusion header
- Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
- Intel Smart Response Technology
- RoHS
- System level control
- UID
- WOL
|
| |
|
| Operating Temperature Range |
-
0°C ~ 60°C (32°F ~ 140°F)
|
| Non-Operating Temperature Range |
-
-20°C ~ 60°C (-4°F ~ 140°F)
|
| Operating Relative Humidity Range |
-
10% ~ 85% (non-condensing)
|
| Non-Operating Relative Humidity Range |
-
10% ~ 95% (non-condensing)
|
|
= Most optimized Chassis for SuperServer Configuration
