 |
 |
SKU |
|
|
 |
 |
Form Factor |
 |
Extended ATX |
 |
Dimensions |
 |
12" x 13" (30.5cm x 33.0cm) |
 |
 |
 |
CPU |
 |
Dual mPGA603 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |
 |
System Bus |
 |
400MHz system bus |
 |
 |
 |
Memory Capacity |
 |
Four 184-pin DIMM sockets Supports up to 8 GB DDR200 memory Dual channel memory bus Memory must be populated in pairs |
 |
Memory Type |
 |
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
 |
DIMM Sizes |
 |
128 MB, 256 MB, 512 MB, 1 GB, 2 GB |
 |
Memory Voltage |
 |
2.5 V only |
 |
 |
 |
Chipset |
 |
Intel® E7500 chipset MCH + ICH3-S + P64H2 |
 |
IPMI |
 |
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
 |
Network Controllers |
 |
1x Intel® 82544 Gigabit Ethernet 1x Intel® 82550 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
 |
Graphics |
 |
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
 |
 |
 |
PCI Expansion |
 |
1x 64-bit 133/100/66MHz PCI-X (3.3V) slot with SXB (Supermicro Extended Bus) slot
1x slim 64-bit 66MHz PCI (3.3V) slot
|
 |
IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
 |
USB |
 |
Up to 5 USB ports |
 |
Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
|
 |
 |
 |
1U Chassis |
 |
SC812i-400 SC812L-350 |
 |
Important Note |
 |
To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |
 |
 |
 |
BIOS Type |
 |
4Mb Flash EEPROM with Phoenix® BIOS |
 |
BIOS Features |
 |
Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 ACPI 1.0 Hardware BIOS virus protection |
 |
 |
 |
Software / Hardware |
 |
Optional IPMI (Intelligent Platform Management Interface) 1.5 SuperDoctor® III Watch Dog |
 |
Power Configurations |
 |
ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode control for AC power loss recovery Internal/External modem remote ring-on |
 |
 |
 |
Voltage |
 |
Monitors for CPU Cores,
+1.8V, +3.3V, +5V, ±12V, 3.3V Standby
CPU Core 3-Phase-switching voltage regulator with
auto-sense from 1.3V-1.5V
Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
FAN |
 |
Total of three 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |
 |
Temperature |
 |
Monitoring for CPU, chassis, environment CPU thermal trip support |
 |
LED |
 |
CPU Overheat LED System Overheat LED Suspend-state indicator LED |
 |
Other Features |
 |
Chassis intrusion detection Chassis intrusion header Chipkill support |
 |
|