SuperServer 1026GT-TRF

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Systems   1U   [ 1026GT-TRF ]





Integrated Board
X8DTG-QF+
Key Features
1. Intel® Xeon® processor 5600/5500
    series (dual), with QPI up to 6.4 GT/s
2. Up to 96GB DDR3 1333/1066/800MHz
    ECC Registered DIMM
3. 3 (x16) PCI-E 2.0 slots (support 3
    GPU cards, i.e. M2090, M2070, M2050)
4. 1 (x8) PCI-E 2.0 (in x16) low-profile slot
    via riser card
5. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
6. Intel® 82576 Dual-Port Gigabit
    Ethernet Controller
7. 4x Hot-swap 2.5" SATA Drive Bays
8. 1800W Platinum-level Redundant
    Power Supplies
9. 10x Counter rotating fans w/ optimal
    fan speed control
10. Smart server management tools

Available Colors: Black    

 Drivers & Utilities   BIOS   IPMI   Tested Memory  Manuals   Compatible GPU List  Drive Options 

Product SKUs
SYS-1026GT-TRF
  • SuperServer 1026GT-TRF (Black)
 
Motherboard

X8DTG-QF+
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 130W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

       
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 6x 240-pin DIMM slots
  • Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
GPU
  • Supports 3 GPU Cards such as NVIDIA Fermi M2090, M2070, M2050
Chipset
  • Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port GbE Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output
Serial ATA
  • 6 Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 rear USB 2.0 ports
Serial Port
  • 1 Serial header
Video
  • 1 VGA Connector
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-118G-R1800B
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 30.6" (777mm)
Gross Weight
  • 37 lbs (16.78 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
 
Expansion Slots
PCI-Express
 
Drive Bays
Hot-swap
  • 4x 2.5" Hot-swap SATA drive bays
 
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling
Fans
  • 10x 4cm heavy duty counter-rotating fans with optimal fan speed control
 
Power Supply
1800W (1+1) Redundant 1800W power supply with PMBus
AC Input
  • 1000W Output @ 100-120V, 12-10A, 50-60Hz
  • 1200W Output @ 120-140V, 12-10A, 50-60Hz
  • 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
DC Output
  • 1000W: +12V/84A; +5Vsb/4A
  • 1200W: +12V/100A; +5Vsb/4A
  • 1800W: +12V/150A; +5Vsb/4A
Certification Platinum Level Certified94%+    Platinum Certified
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of ten 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
See Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.